AZ82.64-D-0001-07A | Retrofitting CD changer in seat frame | Model 901, 902, 903, 904, 905 with CODE EF6, EF7, ET8 (Radio Sound 20, 30 or 30 APS) |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1014-01A | Adhesive tape | A 000 989 98 85 |
D82.64-1104-01
1 Install retaining brackets (1) on CD changer (2) with two screws each.
D82.64-1105-01
2 Position CD changer on floor of seat frame and align with side access opening.
When aligning CD changer observe removal and installation of CD magazine. Ensure that there is sufficient space in the area of the side access opening.
3 Mark two mounting holes each for retaining brackets on the floor.
4 Drill cab floor with 3.5 mm bit at marked points.
5 Screw CD changer to vehicle floor with sheet metal screws.
Coat threads of sheet metal screws with sealant before screwing in to protect against water and corrosion.