P82.20-2146-06
Wiring harness connection schematic
Illuminated entrance trim panel
1 Illuminated entrance trim panel wiring harness
7 Converter
10 2-pin connector for converter
11 2-pin connector for illuminated strip
F4 Rear fuse box
br/bl Brown/blue lead for right door contact
br/gr Brown/gray lead for left door contact
rt Red lead, circuit 30
P82.20-2156-01
1 Insert red (rt) lead into free chamber for fuse 3 from rear fuse box (F4).
2 Route wiring harness (1) to right cable duct.
3 Route long tieout (1a) with brown/gray lead for left door contact below rear seat (see dotted line) to left B-pillar base and fasten.
Fasten wiring harness tieout (1a) below rear seat with felt strips in bead.
P82.20-2157-01
4 Expose brown/gray (br/gr) lead from wiring harness from left door contact and check.
5 Connect brown/gray (br/gr) lead from wiring harness (1) to brown/gray (br/gr) lead from wiring harness from left door contact and insulate (see magnified section).
P82.20-2158-01
6 Route short tieout from wiring harness with brown/blue (br/bl) lead in right cable duct up to B-pillar.
7 Expose connection lead for right door contact and tie out brown/blue (br/bl) lead.
8 Solder brown/blue lead (br/bl) from wiring harness to brown/blue (br/bl) lead from right door contact and insulate (see magnified section).
P82.20-2166-01
9 Route converter (7), 2-pin plug connector (10) and 2-pin connector for illuminated strip (11) forward to the associated cable duct and position.
2-pin connector for illuminated strip (11) can be connected to illuminated strip later.