P98.00-0352-01
P98.00-0351-01
P98.00-0350-01
1 Remove turn signal lamp, side paneling with clips and lower molding strip.
2 Place plastic insert (1) between rubber seal and front fender and mask at bumper with masking tape.
3 Mask front fender channel all the way around overlapping with 50 mm wide masking tape.
Mask adjacent surfaces with masking tape.
4 Cover turn signal lamp opening with masking paper.
5 Cover complete vehicle with masking paper.
After completion of the painting (before drying) remove masking tape, so that wet paint can run at transition without edge.
Paint replacement wheelhouses to match color of car after applying permanent underbody protection.
Paint upper or lower part depending on point damaged.