ar9160d0622a

Remove/install airbag/belt tensioner control unit

유형 ar · 주제 91.60 · 버전 0111 · 2019-07-24

적용 대상: Model 690.6 with code SA5 (Airbag, front driver's seat) Model 901, 902, 903, 904, 905 with code SA5 (Airbag, front driver's seat) Model 901, 902, 903, 904, 905 with code SA6 (Airbag, co-driver)

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 91 시트, 카우치, 보호장치 › 91.60 에어백, 보행자 보호 — 시리즈 690 (모델 6**) · 시리즈 901 · 시리즈 902 · 시리즈 903 · 시리즈 904 · 시리즈 905

EinPAS 27 수동형 안전/시트 안전 시스템 › 27.16 에어백 › 27.16.11 컨트롤 유닛/릴레이 — 시리즈 690 (모델 6**) · 시리즈 901 · 시리즈 902 · 시리즈 903 · 시리즈 904 · 시리즈 905

EinPAS 27 수동형 안전/시트 안전 시스템 › 27.17 SRS › 27.17.11 컨트롤 유닛/릴레이 — 시리즈 690 (모델 6**) · 시리즈 901 · 시리즈 902 · 시리즈 903 · 시리즈 904 · 시리즈 905

AR91.60-D-0622A

Remove/install airbag/belt tensioner control unit

23.07.2019

Model

690.6

with code SA5 (Airbag, front driver's seat)

Model

901, 902, 903, 904, 905

with code SA5 (Airbag, front driver's seat)

Model

901, 902, 903, 904, 905

with code SA6 (Airbag, co-driver)

Modification notes

23.07.2013

Disconnect battery and associated operation steps, removed

Operation step 1, 9, 10, 11

Remove/install airbag/belt tensioner control unit

1

Airbag control unit

2

Connector

3

Screw

4

Sheet metal screw

5

Cover

6

Ground cable

7

Bracket for control units

8

Control unit cover

D91.60-1167-06

Remove/install

Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.Model 690.6
with code SA5 (Airbag, front driver's seat)
Model 901, 902, 903, 904, 905
with code SA5 (Airbag, front driver's seat)
Model 901, 902, 903, 904, 905
with code SA6 (Airbag, co-driver)

AS91.00-Z-0001-01D

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B

1

Remove ignition key from ignition lock

2

Remove driver's seat

AR91.10-D-1010A

3

Remove cover (5) below driver seat

4

Unscrew bracket for control units (7) and place to one side with control units

5

Remove control unit cover (8)

6

Remove airbag control unit (1) at floor of the driver seat console

Installation: Pay attention to ground line (6).

7

Release connector (2) (arrow) and disconnect at airbag control unit (1)

8

Install in the reverse order

9

Connect diagnostic system and perform quick test

10.1

Read out fault memory of airbag (AB) system and delete fault memory

When installing the old airbag control unit (1)

10.2

Perform parameterization of the airbag control unit (1)

When replacing the airbag control unit (1)

참조 문서