P91.40-2475-09
1 Seat belt buckle
2 Plug assembly
3 Bracket
4 Electrical connector
R46 Driver buckle ETR squib
R46/1 Front passenger buckle ETR squib
5 Tie strap
6 Wiring harness
7 Screw
8 Electrical connector
| Remove/Install | ||
Danger! | Risk of injury. Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag unit with deployment face up, do not subject to temperatures above 100 °C. When working on these units, disconnect the power supply. | |
| Instructions for performing repair, body work and welding on vehicles with airbags and ETR units | ||
| Assessment of airbag and belt tensioner units in accident vehicles | ||
| Legal regulations on handling and storing airbags and emergency tensioning retractors | ||
1 | Remove left or right front seat | ||
2 | Place front seat to the rear on the front seat backrest | When putting down use a suitable protective surface, as otherwise the paint on the backrest frame may be damaged. | |
3 | Remove plug assembly (2) using suitable screwdriver on bracket (3) | ||
4 | Unlock and detach electrical connector (4) using suitable screwdriver on plug assembly (2) | ||
5 | Expose wiring harness (6) | Note correct installation positions. | |
6 | Remove tie straps (5) and detach electrical connector (8) on the driver buckle ETR squib (R46) or the front passenger buckle ETR squib (R46/1) | Installation: Replace tie straps (5). | |
7 | Undo bolt (7) on seat belt buckle (1) and remove seat belt buckle (1) | | |
If the seat belt buckle (1) is replaced, then the faulty seat belt buckle (1) must be disposed of properly: | |||
| Notes on disposing of airbag and emergency tensioning retractor units | ||
8 | Install in the reverse order | ||
9 | Read out DTC memory | ||
| Connect STAR DIAGNOSIS, interrogate fault memory | ||
Diagnosis system STAR DIAGNOSIS |
Seat belts/emergency tensioning retractors
Commercially available tools
참조 문서
- ad0000p200004a
- ad0000p200004a Star Diagnosis 연결 후 폴트 메모리 판독
- ah9100p000201m 에어백 유닛 또는 안전벨트 텐셔너 유닛이 장착된 차량에서의 정비 작업, 차체 작업, 용접 작업 실행에 관한 지침
- ah9100p000401a 에어백 유닛과 안전벨트 텐셔너 유닛의 취급 및 보관에 관한 법규
- ah9100p000601b 사고 차량의 에어백 유닛 및 안전벨트 텐셔너 유닛 평가
- ar9110p1000v
- as9100z000101a 에어백 유닛 혹은 안전벨트 텐셔너 유닛의 점검 작업 또는 정비 작업 중 상해 위험
- os9100p000101a