Remove/install seat belt with emergency tensioning retractor

AR91.40-P-0630SLC

Remove/install seat belt with emergency tensioning retractor

27.6.07

 

Remove/install

 Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

 Danger!

Risk of injury caused by release of spring in the automatic belt retractor is released.

Never disassemble automatic belt retractors.

AS91.00-Z-0002-01A



Notes on performing repair, body work and welding on vehicles with airbags and ETR units

AH91.00-P-0002-01M



Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B



Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

1

Remove paneling from roll bar

AR68.30-P-1380SLC

2

Remove rear passenger compartment side trim panel

AR68.30-P-4780SLC

3

Remove bracket (2)

4

Unscrew bolt (3) and remove seat belt guide bracket (4)



*BA91.40-P-1002-01A

5

Remove bolts (6)



*BA91.40-P-1020-01A

6

Undo bolts (7) and remove seat belt with emergency tensioning retractor (1) together with the bracket (8) from the crossmember



*BA91.40-P-1019-01A

7

Detach electrical connector (9) from left emergency tensioning retractor squib (R12/1) or right emergency tensioning retractor squib (R12/2)

 Installation: When the squib has triggered check the electrical connector (9) for signs of damage. Any damage to the electrical connector (9) may result in failure of the emergency tensioning retractor system.

8

Remove seat belt with emergency tensioning retractor (1) and bracket (8)

9

Undo bolt (10) and remove seat belt with emergency tensioning retractor (1) from bracket (8)

Only when replacing.



*BA91.40-P-1021-01A



Notes on disposing of airbag and emergency tensioning retractor units

OS91.00-P-0001-01A

10

Install in the reverse order

Number

Designation

Model
199.4

BA91.40-P-1002-01A

Screw/nut on front seat belt guide bracket

Nm

30

BA91.40-P-1019-01A

Bolt, bracket for automatic belt retractor to soft top crossmember

Nm

25

BA91.40-P-1020-01A

Bolt, bracket for automatic belt retractor to B-pillar

Nm

17

BA91.40-P-1021-01A

Bolt, automatic belt retractor to bracket

Nm

30