Pliers
454 589 02 37 00
P91.18-2211-11
Removal
1.1 Bend open and remove clips (3).
With code (S25) rear center armrest (FFO).
2 Place cover (1) with foam section (2) on its back.
P91.18-2213-08
3 Fold back the cover (1) until the clips on the foam section (2) are accessible.
4 Release cover (1) from clips on foam section (2) using pliers.
Do not damage clips on foam section (2), otherwise foam section (2) will become unusable.
5 Remove the cover (1).
Attaching
6 Align the cover (1) on the foam section (2).
7 Secure cover (1) to clips on foam section (2) in specified order (A to L).
The carriers of the cover (1) must latch into the clips of the foam section (2).
P91.18-2211-11
8 Pull cover (1) over foam section (2) and align.
Ensure that cover (1) is correctly aligned on foam section (2).
9 Place cover (1) with foam section (2) on its front.
10.1 Thread clips (3) through openings in cover (1) and foam section (2) and bend closed using suitable pliers.
With code (S25) Rear center armrest (FFO).