P91.12-0208-04
1 Cover
2 Pull cable
3 Backrest fitting
4 Screws
| Removal, installation | ||
1 | Remove rear backrest | ||
2 | Unscrew cover (1) | ||
3 | Separate pull cable (2) at adjustment nut and counternut | Installation: Arrest release lever in locked position. Screw union nut onto thread on pull cable until pull cable is tensioned slightly. Then turn union nut back 1 to 2 turns and secure with counter nut in this position. | |
4 | Unscrew backrest fitting (3) | ||
5 | Reinstall in opposite order |