ar9112p1000sa

Remove/install rear seat

유형 ar · 주제 91.12 · 버전 0102 · 2012-02-24

적용 대상: MODEL 463.236 /248 with CODE (979) Special protection version with CODE (ZS6) Special protection version FB6 individual seats in rear MODEL 463.236 /248 with CODE (979) Special protection version with CODE (ZS7) Special protection version FB7 individual seats in rear

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 91 시트, 카우치, 보호장치 › 91.12 리어시트 — 시리즈 463 (모델 236, 248)

EinPAS 37 내부 사양 › 37.27 후방 시트 › 37.27.30 후방 시트 전체 — 시리즈 463 (모델 236, 248)

AR91.12-P-1000SA

Remove/install rear seat

16.2.12

MODEL 463.236 /248
with CODE (979) Special protection version
with CODE (ZS6) Special protection version FB6
individual seats in rear

MODEL 463.236 /248
with CODE (979) Special protection version
with CODE (ZS7) Special protection version FB7
individual seats in rear

Remove/install rear seat

P91.12-2655-10

1 Screw, seat to seat rail

Remove/install

1

Activate service mode in Telematic Alarm Identification on Demand (emergency call system) (TELE AID)

Only on model 463.248 up to 1.4.07 with code (ET2) TELE AID car telephone emergency call system

AR82.95-P-0005-03GR

Notes regarding the Tele-Aid emergency call system

AH82.95-P-0001-01GA

2

Move rear seat to rear

3

Remove bolts on seat to seat rail (1) at front

*BA91.12-P-1001-03J

4

Move rear seat forward

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

5

Disconnect ground line of battery (G1)

Model 463.236/248 with code (979) Special protection version, with code (ZS6) Special protection version FB6, with code (E26) Additional battery 100 Ah incl. cutoff relay

Model 463.236/248 with code (979) Special protection version, with code (ZS7) Special protection version FB7, with code (E26) Additional battery 100 Ah incl. cutoff relay

AR54.10-P-0003PM

Notes on battery

All models

AH54.10-P-0001-01A

6

Detach electrical connector for seat adjustment unit (X54/1)

7

Remove bolts on seat to seat rail (1) at rear

*BA91.12-P-1001-03J

8

Remove rear seat

9

Install in the reverse order

10

Deactivate service mode in Telematic Alarm Identification on Demand (emergency call system) (TELE AID)

Only on model 463.248 up to 1.04.07

with code (ET2) Tele-Aid - car telephone emergency call system

AR82.95-P-0005-03GR

Notes regarding the Tele-Aid emergency call system

AH82.95-P-0001-01GA

11

Read out fault memory and erase

STAR DIAGNOSIS
Stored faults which can result from cables being disconnected or from simulation during removal and installation or test work, have to be processed and erased in the fault memories after completing the work.

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

12

Perform basic programming

AR00.19-P-0200P

13

Perform a function test

Rear seats

Number

Designation

Model 463

BA91.12-P-1001-03J

Screw, seat to seat rail

Nm

60

참조 문서