AR88.40-D-3020A | Adjust engine hood | 17.2.96 |
MODEL 901, 902, 903, 904, 905
MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODELS 690.6
D88.00-0013-06
A Left, right gap width
B Hood depth and flushness
1 Hood lock top section
2 Lock nut
3 Locking pin
4 Rubber pad
Adjusting | |||
1 | Adjust gap width between engine hood and fender | By horizontally offsetting hinges (A). | |
2 | Adjust hood depth and flushness in relation to fender | By moving engine hood (B) vertically. | |
| |||
3 | Loosen hood lock upper section (1) and align on hood lock bottom section | ||
4 | Tighten hood lock upper section | ||
5 | Loosen lock nut (2) and adjust striker pin (3) to correct height. | Adjust engine hood on hood lock upper section to height. | |
6 | Screw on lock nut (2) | ||
7 | Adjust height of hood at front on rubber pad (4) on right and left |
Adjustment values for engine hood
Number | Designation | Models | Models | |
BE88.40-N-1001-01A | Gap width for engine hood/left, right fender | mm | 5...6 | 5...6 |
BE88.40-N-1002-01A | Height offset for engine hood/fender | mm | 1 | 1 |
Engine hood