ar8820s2200p

Remove/install rear bumper

유형 ar · 주제 88.20 · 버전 0200 · 2018-11-20

적용 대상: Model 470, 471

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 88 부착부품, 외측　플랩 › 88.20 범퍼 — 시리즈 470 · 시리즈 471

EinPAS 35 바디/프레임/부착 부품 › 35.38 범퍼/스포일러/외부 패널/보관함/프런트 보호 › 35.38.31 후방 범퍼 — 시리즈 470 · 시리즈 471

AR88.20-S-2200P

Remove/install rear bumper

31.10.2018

Model

470, 471

Modification notes

29.10.2018

Operation step added.

Operation Step 3

30.10.2018

Operation step group "Check", added.

Operation step 8, 9

Remove/install rear bumper

S88.20-4573-09

1

Rear bumper

3

Bolts

2

Electrical connector

4

Screw

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Raise vehicle.

AR00.60-S-1000-04P

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01P

2

Expose and disconnect electrical connector (2).

3

Expose and disconnect electrical connector of PARKTRONIC.

Model 470, 471
with code EZ8 (PARKTRONIC)

4

Loosen bolts (4).

Bolts (4) remain on the longitudinal frame member.

Bolt, rear bumper to longitudinal frame member

*BA88.20-N-1001-01P

5

Remove screw/bolts (3).

Bolt, rear bumper to longitudinal frame member

*BA88.20-N-1001-01P

6

Remove rear bumper (1) with a helper.

7

Install in the reverse order

Check

8

Perform function check of the licence plate lighting.

9

Perform function check of Parktronic.

Model 470, 471
with code EZ8 (PARKTRONIC)

Bumper, bumper bracket

Number

Designation

Model 470, 471

BA88.20-N-1001-01P

Bolt, rear bumper to longitudinal frame member

Nm

130

참조 문서