P88.20-2706-09
1 Electrical connector
2 Retaining clips
4 Electrical connector
5 Outside temperature display temperature sensor
6 Electrical connector
7 Nuts
8 Parking lamp
B8/4 Inner right front PTS ultrasonic sensor
B8/5 Center right front PTS ultrasonic sensor
B8/6 Outer right front PTS ultrasonic sensor
E6/1 Left front side marker lamp
E6/2 Right front side-marker lamp
9 Electrical connector
10 Wiring harnesses
11 Wiring harness clips
B8/1 Outer left front PTS ultrasonic sensor
B8/2 Center left front PTS ultrasonic sensor
B8/3 Inner left front PTS ultrasonic sensor
P88.20-2707-09
12 Expanding rivets
13 Expanding rivets
16 Bumper inside section
14 Clips for upper inner connection section
15 Clip for lower connection of inside section
P88.20-2708-04
16 Bumper inner section
20 Impact absorber
P88.20-2709-07
17 Expanding rivets
19 Retaining lug
18 Telescopic nozzle cover
P88.20-2710-07
21 Bumper paneling
22 Air inlet grille
25 Towing eye cover
26 Retaining rail
23 Catch hook
24 Retaining clips
Modification notes
| Removing | ||
1 | Remove front fog lamps | ||
2 | Remove front bumper | ||
| Disassemble | ||
3 | Disconnect electrical connector (1) | Only on vehicles with code (494) USA version | |
On both sides | |||
4 | Press retaining clamps (2) toward inside and remove left front side marker lamp {{USA}} (E6/1) and right front side marker lamp {{USA}} (E6/2) | Only on vehicles with code (494) USA version | |
On both sides | |||
5 | Unclip electrical connector (4) from bumper inner section (16). | Only on vehicles with code (220) Parktronic system (PTS). | |
6 | Unclip outside temperature indicator temperature sensor (5) from air inlet grate (22). | ||
7 | Disconnect electrical connector (6) | On both sides | |
8 | Unscrew nuts (7) and remove parking lamp (8) | On both sides | |
9 | Unclip electrical connector (9) from bumper inner section (16). | ||
10 | Remove PTS ultrasonic sensors (B8/1, B8/2, B8/3, B8/4, B8/5, B8/6) in front bumper | Only on vehicles with code (220) Parktronic system (PTS). | |
Installation: Check sealing ring, replace if damaged. | |||
Unlocking tool | |||
11 | Remove wiring harnesses (10) from wiring harness clip (11) and remove from bumper inner section (16). | Installation: Route wiring harnesses (10) into corresponding recesses. | |
12 | Remove expansion rivets (12) from bumper paneling (21). | ||
13 | Remove expansion rivets (13) from bumper inner section (16). | ||
14 | Unclip clip for upper inner connection section (14) from bumper paneling (21). | Installation: Ensure that clip for upper inner connection section (14) is seated correctly in bumper paneling (21). | |
15 | Unclip clips for bottom inner connection section (15) from bumper paneling (21) | Installation: Ensure that clip for bottom inner connection section (15) is seated correctly in bumper paneling (21). | |
16 | Remove bumper inner section (16) | ||
17 | Lift lugs and remove impact absorber (20) | The impact absorber (20) is arrested with a retaining lug | |
18 | Remove expansion rivets (17) and remove left and right telescoping nozzle cover (18) from bumper paneling (21, arrow). | Only on vehicles with code (600) Headlamp cleaning system | |
Installation: Ensure that retaining lugs (19) are seated properly in bumper paneling (21). | |||
19 | Unclip air inlet grate (22) on catch hook (23) from bumper paneling and remove | Mounting wedge | |
20 | Press retaining clips (24) toward inside and remove tow eye cover (25). | Installation: Ensure that retaining strip (26) is seated correctly in bumper paneling (21). | |
Modify | |||
21 | Modify bumper paneling (21) | Only on vehicles with chrome-plated underride guard | |
| Assemble | ||
22 | Assemble in the reverse order | ||
| Install | ||
23 | Install front bumper | ||
24 | Install front fog lamps |
168 589 02 31 00
Unlocking tool
Mounting wedge
110 589 03 59 00