D88.20-1111-06
1 Bumper corner
2 Bumper corner upper section
3 Ram strip
4 Clips
5 Mounting clamp
6 Collar bolts
| Remove/install | ||
1 | Remove protective strip (3) | ||
2 | Remove clips (4) | ||
3 | Detach bumper corner top section (2 from side wall using long wedge | Installation: Check condition of mounting clips (5) and replace if necessary. | |
Long wedge | |||
4 | Open rear-end doors | ||
5 | Unscrew collar screws (6) | | |
6 | Pull bumper corner (1) out at side of bumper center section | ||
7 | Install in the reverse order |
Bumper
Number | Designation | Model | Model | ||
BA88.20-N-1002-01A | Collar screw, rear bumper to body | Nm | 9 | 9 | |
Long wedge
115 589 03 59 00