ar8370d5937a

Removing and installing auxiliary heater control module

유형 ar · 주제 83.70 · 버전 0103 · 1998-07-31

적용 대상: MODEL 902.32# /42#, 903.32# /42#, 904.32# /42# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater Heater designation D1L-C MODEL 903.02# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater Heater designation B1L-C

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 83 에어컨 › 83.70 보조히터, 추가히터, 추가히터 — 시리즈 902 (모델 32*, 42*) · 시리즈 903 (모델 02*, 32*, 42*) · 시리즈 904 (모델 32*, 42*)

EinPAS 39 히터/환기/에어컨 › 39.25 독립식 히터/보조 히터 › 39.25.11 컨트롤 유닛/릴레이 — 시리즈 902 (모델 32*, 42*) · 시리즈 903 (모델 02*, 32*, 42*) · 시리즈 904 (모델 32*, 42*)

AR83.70-D-5937A

Removing and installing auxiliary heater control module

4.11.96

MODEL 902.32# /42#, 903.32# /42#, 904.32# /42# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation D1L-C

MODEL 903.02# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation B1L-C

Removing and installing auxiliary heater control module

D83.70-0009-06

1 Control module
2 Electrical connector
3 Electrical connector
4 Retaining bracket

Removal, installation

Danger!

Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation

Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves.

AS83.70-Z-0002-01A

1

Exert upward tension on retaining bracket (4, arrow A)

2

Remove control module (1)

Installation: First hook in control module at bottom (arrow B), then catch at top in retaining bracket (arrow A).

3

Disconnect electrical connectors (2, 3)

4

Install in opposite order

참조 문서