ar8370d5302h

Remove/install heater

유형 ar · 주제 83.70 · 버전 0103 · 2003-03-10

적용 대상: MODELS 901.32#, 902.32# /42#, 903.32# /42#, 904.32# /42# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater D1L-C compact heater MODELS 901.62#, 902.62#, 903.62#, 904.62#, 905.62# ## up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater D1L-C compact heater MODELS 901.62#, 902.62#, 903.62#, 904.62#, 905.62# ## as of 382002 as of 12.3.02 with CODE (H11) Warm air auxiliary heater AIRTRONIC D2 heater

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 83 에어컨 › 83.70 보조히터, 추가히터, 추가히터 — 시리즈 901 (모델 32*, 62*) · 시리즈 902 (모델 32*, 42*, 62*) · 시리즈 903 (모델 32*, 42*, 62*) · 시리즈 904 (모델 32*, 42*, 62*) · 시리즈 905 (모델 62*)

EinPAS 39 히터/환기/에어컨 › 39.25 독립식 히터/보조 히터 › 39.25.30 히터 — 시리즈 901 (모델 32*, 62*) · 시리즈 902 (모델 32*, 42*, 62*) · 시리즈 903 (모델 32*, 42*, 62*) · 시리즈 904 (모델 32*, 42*, 62*) · 시리즈 905 (모델 62*)

AR83.70-D-5302H

Remove/install heater

17.11.97

MODELS 901.32#, 902.32# /42#, 903.32# /42#, 904.32# /42# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater
D1L-C compact heater

MODELS 901.62#, 902.62#, 903.62#, 904.62#, 905.62# ## up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater
D1L-C compact heater

MODELS 901.62#, 902.62#, 903.62#, 904.62#, 905.62# ## as of 382002 as of 12.3.02 with CODE (H11) Warm air auxiliary heater
AIRTRONIC D2 heater

Remove/install heater

D83.70-1294-06

D1L-C compact heater shown

1 Heater unit

2 Exhaust line

3 Combustion air line

4 Hose clamp

5 Connector

6 Gasket

7 Fuel pipe

8 Securing clamp

9 Nut

10 Securing clamp

Remove/Install

Danger!

Risk of explosion from fuel vapors, risk of poisoning from inhaling combustion gases and risk of injury from burns during and after operation of heater unit

Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or while filling fuel tank. Allow heater unit to cool down after operation and wear protective gloves.

AS83.70-Z-0002-01A

1

Detach fixing clamp (8) of exhaust gas line (2) from underbody

2

Detach fixing clamp (10) of combustion air line (3) from underbody

Danger!

Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel.

No fire, sparks, naked flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

3

Loosen hose clamp (4) and pull fuel line (7) off heater

Collect fuel which flows out.

4

Unscrew nuts (9) of heater (1)

5

Remove seat frame of rear bench seat and fold rear bench seat upwards

6

Disconnect connector (5) of connection line

7

Remove heater (1) with gasket (6) from cab floor

Installation: Install new gasket (6).

8

Clean sealing surfaces

9

Install in the reverse order

10

Check function of auxiliary heater

참조 문서