ar8330p5600glc

Remove and install additional fan

유형 ar · 주제 83.30 · 버전 0101 · 2012-02-24

적용 대상: MODEL 461.331 with ENGINE 612.966

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 83 에어컨 › 83.30 에어컨 — 시리즈 461 (모델 331)

EinPAS 15 엔진 › 15.25 엔진 냉각 시스템 › 15.25.45 팬/팬 클러치/팬 드라이브 — 시리즈 461 (모델 331)

EinPAS 39 히터/환기/에어컨 › 39.22 냉각 시스템 › 39.22.30 송풍기 모터/액추에이터 — 시리즈 461 (모델 331)

엔진/변속기에도 적용: 612 966

AR83.30-P-5600GLC

Remove and install additional fan

16.2.12

MODEL 461.331 with ENGINE 612.966

Remove and install additional fan

P83.30-4068-09

1 Upper radiator cross member

2 Cooling line of power steering system

6 Nut

M4 Additional fan

3 Screw

4 Electrical line

Remove/Install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground cable from battery

AR54.10-P-0003GL

Notes on battery

All models

AH54.10-P-0001-01A

2

Remove front grille

AR88.00-P-2115GL

3

Remove upper radiator cross member (1)

Do not release hood lock and hood release cable.

4

Undo bolts (3) of power steering system cooling line (2)

Do not detach cooling line for power steering system (2).

5

Disconnect electrical lines (4) on interference suppression capacitors of additional fan (M4)

Mark electrical lines (4) before disconnecting them.

Installation: Install new tie straps.

6

Remove nuts (6)

7

Remove additional fan (M4)

To do so push the cooling line for the power steering system (2) to one side and remove the additional fan (M4) upwards.

8

Install in the reverse order

9

Read out fault memory and erase

STAR DIAGNOSIS
Stored faults which can result from lines being disconnected or from simulation during removal and installation or test work, have to be processed and erased in the fault memories after completing the work

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

*WH58.30-Z-1048-13A

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

참조 문서