ar8325d1155a

Remove and install pulsed valve

유형 ar · 주제 83.25 · 버전 0105 · 2003-09-15

적용 대상: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic" MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic" MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 83 에어컨 › 83.25 자동히터 — 시리즈 690 (모델 6**) · 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**) · 시리즈 905 (모델 6**)

EinPAS 39 히터/환기/에어컨 › 39.15 에어컨 시스템 › 39.15.13 라인/호스/밸브 — 시리즈 690 (모델 6**) · 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**) · 시리즈 905 (모델 6**)

AR83.25-D-1155A

Remove and install pulsed valve

15.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic"

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

Remove and install pulsed valve

D83.25-1105-06

1 Cycle valve

2 Hose clamp

3 Coolant hose

4 Rubber mounts

5 Bolt

6 Bracket

7 Rubber mounts

Remove/install

1

Position suitable receptacle for coolant below vehicle

2

Loosen hose clamps (2) and disconnect hoses (3)

3

Unscrew screws (5) and remove bracket (6) together with pulsed valve (1)

4

Turn bracket (6) slightly to the right and remove from the rubber mounts (4)

5

Pull rubber mounts (4, 7) out

Installation: install new rubber mount.

6

Install in the reverse order