AR83.25-D-1124C | Remove and install air conditioning control and operating unit | 28.6.11 |
MODEL 900, 906.1 /2 /6 /7 with CODE (HH9) Regulated air conditioning (Tempmatic)
MODEL 900 with CODE (HK4) Rear air conditioning, reinforced
MODEL 906.6 /7
with CODE (HH9) "Tempmatic" regulated air conditioning
with CODE (HH7) Additional air conditioning in rear
MODEL 906.6 /7 with CODE (H08) High-performance air conditioning
D83.25-1118-11
Shown with code (HH7) Additional air conditioning in rear
1 Bolts
S98 AAC [KLA] control and operating unit
| Remove/install | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Connect Star Diagnosis and conduct initial startup of AAC [KLA] control and operating unit (S98) | When replacing the AAC [KLA] control and operating unit (S98). | |
2 | Unclip bezel with UCP control unit on instrument panel center section, and disconnect electrical connector from UCP control unit | ||
3 | Remove bolts (1) | ||
4 | Pull out AAC [KLA] control and operating unit (S98) from instrument panel | ||
5 | Disconnect electrical connector on the rear of the AAC [KLA] control and operating unit (S98) | ||
6 | Install in the reverse order | ||
7 | Check AAC [KLA] control and operating unit (S98) for proper operation |
참조 문서
- ad0000d200004sd
- ah5400p000101a 정전기 방전으로 인한 전자 부품 손상 방지 지침