ar8320t3400b

Remove and install heat exchanger from heater housing

유형 ar · 주제 83.20 · 버전 0102 · 2005-07-12

적용 대상: MODELS 613.355 /358 /388 /455 /485 (Konvekta front box version)

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 83 에어컨 › 83.20 히터 — 시리즈 613 (모델 355, 358, 388, 455, 485)

EinPAS 39 히터/환기/에어컨 › 39.15 에어컨 시스템 › 39.15.32 하우징/열 교환기/증발기/필터 — 시리즈 613 (모델 355, 358, 388, 455, 485)

AR83.20-T-3400B

Remove and install heat exchanger from heater housing

11.12.00

MODELS 613.355 /358 /388 /455 /485
(Konvekta front box version)

Remove and install heat exchanger from heater housing

T83.20-0044-11

1 Heating water pipe

2 Heating water pipe

3 Regulating valve

4 Heat exchanger

Remove/install

Danger!

Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles.

Wear protective gloves, protective clothing and eye protection.

AS20.00-Z-0001-01A

Notes on coolant

All engines.

AH20.00-N-2080-01A

1

Remove heater unit

AR83.25-T-1000B

2

Remove lower part of heater housing

AR83.20-T-3210B

3

Remove air baffle in heater housing

AR83.25-T-1001-01B

4

Remove heating water pipes (1, 2) from regulating valve (3)

Check hose connections for damage, replace if necessary.

5

Unscrew heating water pipe (1) from heat exchanger (4)

6

Unscrew two bolts (arrows) on each side of the heat exchanger

The bolts are concealed by a sound-insulating mat. If necessary, feel for the bolt heads.

7

Pull out heat exchanger (4)

Do not damage the sound-insulating mats inside the heater housing.

8

Install in the reverse order

참조 문서