ar8295s0019p

Remove/install HERMES control unit

유형 ar · 주제 82.95 · 버전 0101 · 2019-01-04

적용 대상: Model 470

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 82 전기적 장치, 구조 › 82.95 비상호출시스템 — 시리즈 470

EinPAS 31 커뮤니케이션/정보/엔터테인먼트 › 31.21 텔레매틱 서비스 › 31.21.11 컨트롤 유닛/릴레이 — 시리즈 470

EinPAS 31 커뮤니케이션/정보/엔터테인먼트 › 31.22 비상 전화 시스템 › 31.22.11 컨트롤 유닛/릴레이 — 시리즈 470

AR82.95-S-0019P

Remove/install HERMES control unit

21.11.2018

Model

470

Remove/install HERMES control unit

S82.95-4510-08

1

Nuts

N112/9

HERMES control unit

2

Electrical connectors

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Connect vehicle diagnosis system and commission HERMES control unit (N112/9).

If the HERMES control unit (N112/9) has been replaced.

AD00.00-S-2000-06P

2

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

3

Release the bottom trim for the instrument panel on the driver's side and remove it from the working area with attached electric lines.

AR68.10-S-1501P

4

Disconnect electrical connectors (2).

The number of electrical connections (2) may vary depending on vehicle equipment.

5

Unscrew nuts (1).

6

Remove HERMES control unit (N112/9).

7

Install in the reverse order

Check

8

Run function test of emergency call system using vehicle diagnosis system.

AD00.00-S-2000-06P

참조 문서