S82.85-4596-09
2 | Instrument panel | 4 | Air duct group | |
3 | Bolts |
S82.85-4597-09
1 | Emergency call system antenna | 6 | Bracket | |
2 | Instrument panel | 7 | Electrical connector | |
5 | Screw |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove instrument panel (2). | ||
2 | Unscrew bolts (3). | ||
3 | Remove air duct group (4). | ||
4 | Remove screw (5) and remove emergency call system antenna (1) with holder (6) far enough to gain access to the electrical connector (7). | ||
5 | Disconnect electrical connector (7) and remove emergency call system antenna (1) with holder (6). | ||
6 | Remove emergency call system antenna (1) from holder (6). | If the emergency call system antenna (1) is replaced. | |
7 | Install in the reverse order | ||
| Check | ||
8 | Check emergency call system for operational readiness using vehicle diagnosis system. | ||
|
참조 문서
- ad0000s200006p
- ah5400p000101a 정전기 방전으로 인한 전자 부품 손상 방지 지침
- ah6800n000101s 차량 승객실에서의 정비 작업 실행 지침
- ar6810s1000p
- ar6810s1000p