ar8295p0008us

Remove/install E-Call emergency call system control unit

유형 ar · 주제 82.95 · 버전 0106 · 2012-02-24

적용 대상: MODEL 463.246 /249 /271 up to 1.4.07 with CODE (ET2) TeleAid car phone emergency call system

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 82 전기적 장치, 구조 › 82.95 비상호출시스템 — 시리즈 463 (모델 246, 249, 271)

EinPAS 31 커뮤니케이션/정보/엔터테인먼트 › 31.22 비상 전화 시스템 › 31.22.11 컨트롤 유닛/릴레이 — 시리즈 463 (모델 246, 249, 271)

AR82.95-P-0008US

Remove/install E-Call emergency call system control unit

16.2.12

MODEL 463.246 /249 /271 up to 1.4.07 with CODE (ET2) TeleAid car phone emergency call system

Remove/install E-Call emergency call system control unit

P82.95-2355-08

1 Cover

3 Nut

C Antenna plug

A35/8 E-call control unit

Arrow: Clip

A Electrical connector

B Fiber optic cable connector

Remove/install E-Call emergency call system control unit

P82.95-2358-08

1 Cover

2 Clip

A35/8 E-call control unit

4 Nut

Remove/install

1

Switch on ignition

2

Move front passenger seat into the rearmost position and into the uppermost position

3

Remove clip (2)

4

Move front passenger seat into the foremost position

5

Remove clips (arrows)

6

Remove cover (1)

7

Unscrew nuts (3)

8

Move front passenger seat into the rearmost position

9

Unscrew nuts (4)

10

Move front passenger seat into the foremost position

11

Switch off ignition and remove ignition key

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

12

Disconnect battery ground line

AR54.10-P-0003G

Notes on battery

All models

AH54.10-P-0001-01A

13

Pull E-call control unit (A35/8) out of bracket

14

Release electrical connector (A) and disconnect

15

Release fiber optic cable connector (B) and disconnect

16

Cover fiber optic cable

AR82.95-P-0005-01A

Notes on fiber optic cable

AH82.70-P-0001-02A

17

Disconnect antenna plug (C)

18

Remove E-call control unit (A35/8)

19

Install in the reverse order

20

Read out fault memory and erase

STAR DIAGNOSIS
Stored faults which can result from cables being disconnected or from simulation during removal and installation or test work, have to be processed and erased in the fault memories after completing the work.

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

21

Perform basic programming

AR00.19-P-0200P

참조 문서