Shown on passenger side |
1 | Tweeter |
2 | Bracket |
3 | Electrical connector |
4 | Catch hook |
S82.62-4590-06
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove left or right speaker cover. | ||
Installation: Reinstall left or right speaker cover only after function test of tweeter (1). | |||
2 | Unclip bracket (2) with tweeter (1) out of instrument panel. | Installation: When inserting the bracket (2), make sure the guide (arrow B) of the bracket (2) is aligned with the groove (arrow A). | |
Clip remover | |||
3 | Disconnect electrical connector (3) and remove bracket (2) with the tweeter (1). | ||
4 | Press the catch hooks (4) in the direction of the arrow (arrow C) and remove the tweeter (1) from the bracket (2). | If the tweeter (1) is replaced. | |
5 | Install in the reverse order | ||
| Check | ||
6 | Perform function test on left or right tweeter (1). |
452 589 01 63 00
Clip remover
참조 문서
- ah5400p000101a 정전기 방전으로 인한 전자 부품 손상 방지 지침
- ah6800n000101s 차량 승객실에서의 정비 작업 실행 지침
- ar6810s1050p