1 | Display |
2 | Electrical connectors |
3 | Bolts |
S82.60-4669-06
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Perform commissioning of display (1) with vehicle diagnosis system | If installing a new display (1). | |
| |||
2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
3 | Remove cover on instrument panel | ||
4 | Unscrew screws/bolts (3) far enough to loosen display (1) from device installation frame | The screws/bolts (3) remain in the display (1). | |
5 | Pull display (1) out of device installation frame far enough to access electrical connectors (2) | ||
6 | Disconnect electrical connectors (2) and remove display (1) | ||
7 | Install in the reverse order | ||
| Check | ||
8 | Perform function test of display (1) |
참조 문서
- ad0000s200006p
- ah5400p000101a 정전기 방전으로 인한 전자 부품 손상 방지 지침
- ah6800n000101s 차량 승객실에서의 정비 작업 실행 지침
- ar6810s1580p