Remove/install rain/light sensor

AR82.30-P-7800RT

Remove/install rain/light sensor

4.10.04

 

Remove/install



Information on preventing damage to electronic components due to electrostatic discharge

All models

AH54.00-P-0001-01A

1

Switch off ignition and remove the transmitter key from the EIS [EZS] control unit

 On vehicles with Keyless Go, code 889: Press Keyless Go start/stop button repeatedly until the ignition is switched off.

Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).

2

Remove rain/light sensor front cover section (1) toward front (arrow)

3

Disconnect electric connector (2)

4

Slide locks (3) downward on both sides of rain/light sensor (B38/2) and remove rain/light sensor (B38/2)

 The rain/light sensor lens is glued to the windshield and must not be removed, otherwise the lens will be damaged.

5

Install in the reverse order

6

Code adaptation of rain sensor and light sensor amplification factor and select type of windshield

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00