ar8220s0020p

Remove/install hardtop dome lamp

유형 ar · 주제 82.20 · 버전 0100 · 2019-02-14

적용 대상: Model 470 with code Y1D (Hardtop) Model 470 with code Y1E (Hardtop with roof railing)

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 82 전기적 장치, 구조 › 82.20 실내　조명 — 시리즈 470

EinPAS 30 조명 시스템 › 30.20 내부 조명 › 30.20.20 실내등 — 시리즈 470

AR82.20-S-0020P

Remove/install hardtop dome lamp

04.02.2019

Model

470

with code Y1D (Hardtop)

Model

470

with code Y1E (Hardtop with roof railing)

Remove/install hardtop dome lamp

S60.30-A029-09

1

Hardtop dome lamp

3

Bolts

5

Headliner

2

Cover

4

Electrical connector

6

Electrical line

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Open rear pop-out window.

2

Disconnect electrical connection (4).

To do so, pull down roof lining (5) far enough until electrical connector (4) is accessible.

3

Unclip covers (2).

Long wedge

*115589035900

4

Remove screw/bolts (3).

5

Remove hardtop dome lamp (1).

To do so, guide hardtop dome lamp (1) with electric line (6) out of slot (arrow) in roof lining (5).

6

Install in the reverse order.

Check

7

Perform function test on hardtop dome lamp (1).

Remove/install hardtop dome lamp

115 589 03 59 00

Long wedge

참조 문서