Remove/install rear dome lamp

AR82.20-P-0113RT

Remove/install rear dome lamp

27.10.04

 

Remove/Install

1

Switch off ignition and remove the transmitter key from the EIS [EZS] control unit

 On vehicles with Keyless Go, code 889: Press Keyless Go start/stop button repeatedly until the ignition is switched off.

Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).

2.1

Unclip rear dome lamp PTS warning indicator (A44/3) towards right (arrow A) and then lower to remove (arrow B)

 Only for vehicles with Parktronic system (PTS), code 220.

 Treat ribbon cable carefully to prevent damage.

3.1

Disconnect electrical connector (1) of the rear dome lamp PTS warning indicator (A44/3)

 Only for vehicles with Parktronic system (PTS), code 220.

4

Carefully unclip left dome lamp, 3rd seat row (E15/3) at the clips (2) and remove

 Treat ribbon cable carefully to prevent damage.

 Long wedge

*115589035900

5

Disconnect electrical connector (3) of the left dome lamp, 3rd seat row (E15/3)

6

Install in the reverse order