ar8210s4660p

Remove/install headlamp control unit

유형 ar · 주제 82.10 · 버전 0100 · 2018-12-11

적용 대상: Model 470, 471 with code LG7 (LED high-performance headlamps)

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 82 전기적 장치, 구조 › 82.10 실외　조명 — 시리즈 470 · 시리즈 471

EinPAS 30 조명 시스템 › 30.15 외부 조명 › 30.15.11 컨트롤 유닛/릴레이 — 시리즈 470 · 시리즈 471

AR82.10-S-4660P

Remove/install headlamp control unit

21.11.2018

Model

470, 471

with code LG7 (LED high-performance headlamps)

Remove/install headlamp control unit

Shown on the right lamp unit

1

Headlamp control unit

2

Bolts

3

Electrical connector

4

Seal

S82.10-4684-04

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Perform commissioning on headlamp control unit (1).

If the headlamp control unit (1) is replaced.

AD00.00-S-2000-06P

2

Remove headlamp.

AR82.10-S-4733P

Installation: The headlamp is adjusted following commissioning of the headlamp control unit.

3

Unscrew bolts (2).

4

Lift headlamp control unit (1) and disconnect electrical connector (3).

5

Check seal (4) for damage and correct seating.

If the seal (4) is damaged.

replace seal (4).

If the seal (4) is not correctly seated in the mount on the headlamp.

Correctly position seal (4).

6

Install in the reverse order

Check

7

Check headlamp adjustment and correct if necessary.

AR82.10-S-1131P

참조 문서