AR82.10-P-4735FF | Adjust headlamps | 19.7.05 |
MODEL 454.0
Adjust headlamp low beam for right-hand/left-hand traffic
P82.10-4329-06
1 Fender liner
2 Low beam service flap
3 Low beam cover cap
4 Adjustment lever
E1 Left front headlamp unit
E2 Right front headlamp unit
| Remove | ||
1 | Turn steering wheel | If adjusting the left front lamp unit (E1), turn steering wheel to the left. | |
2 | Open low beam service flap (2) in fender liner (1) | ||
3 | Detach low beam cover cap (3) from left front lamp unit (E1) or right front lamp unit (E2) | ||
Adjust | |||
4 | Align headlamp adjusting testing unit to vehicle | Observe operating instructions for headlamp adjuster tester. | |
Headlamp beam adjuster | |||
5 | Adjust left front lamp unit (E1) or right front lamp unit (E2) for right-hand/left-hand traffic at adjustment lever (4) (arrow) | Adjustment lever (4) must latch in the relevant end position. | |
Headlamp beam adjuster | |||
| Adjusting headlamps when driving abroad | ||
| Install | ||
6 | Attach low beam cover cap (3) to left front lamp unit (E1) or right front lamp unit (E2) | ||
7 | Close low beam service flap (2) in fender liner (1) | ||
8 | Position steering wheel in straight-ahead position |
Workshop equipment
WE58.40-Z-1006-19A | Headlamp adjustment testing unit |
참조 문서
- ah8210p000101ff 해외 운행 시 전조등 조정