시리즈
ko
ar8050d9830b
Remove/install anti-theft alarm (ATA) control unit
유형 ar · 주제 80.50 · 버전 0103 · 2020-01-27
적용 대상: Model 901.6, 902.6, 903.6, 904.6, 905.6 with code FY1 (Anti-Theft Protection package) Model 901.6, 902.6, 903.6, 904.6, 905.6 with code FZ4 (Anti-theft alarm system with interior protection and towing sensor) Model 901.6, 902.6, 903.6, 904.6, 905.6 with code J67 (Anti-theft alarm system)
“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.
위치
기능 그룹 3 구조 › 80 중앙잠금장치, 편의조작부, 운전자 인증시스템 › 80.50 침입-도난-경보장치 (EDW), 실내보호장치/견인방지장치 — 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**) · 시리즈 905 (모델 6**)
EinPAS 29 주행 인증/안전 시스템 › 29.20 도난/침입 경고 시스템 › 29.20.11 컨트롤 유닛/릴레이 — 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**) · 시리즈 905 (모델 6**)
AR80.50-D-9830B
Remove/install anti-theft alarm (ATA) control unit
10.01.2020
Model
901.6, 902.6, 903.6, 904.6, 905.6
with code FY1 (Anti-Theft Protection package)
Model
901.6, 902.6, 903.6, 904.6, 905.6
with code FZ4 (Anti-theft alarm system with interior protection and towing sensor)
Model
901.6, 902.6, 903.6, 904.6, 905.6
with code J67 (Anti-theft alarm system)
1
Fuse and relay holder
4
Connector
7
Connector
2
Screw
5
Screw
8
Connector
3
Cover
6
ATA [EDW] control unit
Remove/install
Topical note
Notes on battery
AH54.10-P-0001-01A
1
Open flap on the driver seat frame (arrow)
2
Unscrew fuse/relay holder (1)
Lay fuse/relay holder down to the side with connected lines.
3
Pull driver seat fully forward (arrow)
4
Disconnect plug (4)
With CODE H16 (Seat heater for driver)
5
Remove cover (3) below driver seat
6
Remove ATA control unit (6)
7
Release plug (7, 8) from ATA control module (6) and disconnect (arrow)
8
Install in the reverse order
When installing a new control unit, parameterize with Star Diagnosis.
참조 문서
