Removing and installing cover on tilting/sliding roof

AR77.20-P-0500E

23.6.93

MODEL 202
with CODE (412b) Electric tilting/sliding roof
with CODE (414a) Glass electric tilting/sliding roof

P77.20-0008-09

1 Cover (for steel tilting/sliding roof)

2 Cover (for glass tilting/sliding roof)

3 Slider

4 Molding

5 Rubber bellows

	Removal
1	Remove cover	Electrically operated steel tilting/sliding roof (code 412b)	AR77.20-P-0500-01EA
		Electrically operated glass tilting/sliding roof (code 414a)	AR77.20-P-0500-01EB
	Installation
2	Install cover	Electrically operated tilting/sliding roof (code 412b) If cover does not hold in tilting/sliding roof panel	AR77.20-P-0500-02EA
		Replace lower section of clips	AR77.20-P-0500-03EA
		Electrically operated glass tilting/sliding roof (code 414a)	AR77.20-P-0500-02EB
3	Close tilting/sliding roof
4	Check tilting/sliding roof for proper function	When the glass tilting/sliding roof (code 414a) is opened to the rear the cover (2) should be pulled along.

Shop-made tool

Number	Designation
WF77.20-1000-01Z	Puller hook for bottom section of clips for tilting/sliding roof cover