AR72.29-D-1860A | Remove/install motor for electric power windows in front door | 5.10.98 |
MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (V50) Power windows (2 doors)
D72.29-0001-09
1 Carrier plate
2 Motor (power window)
3 Torx bolt
7 Rubber grommet
8 Connector
4 Blind rivet
5 Guide rail
6 Window
| Remove/Install | ||
1 | Lower front window approx. 2 cm | Release of power window | |
2 | Remove door liner from hinged door | ||
3 | Pull rubber grommet (7) out between front door and A-pillar Pull out A-pillar | ||
4 | Detach connector (8) | Secure connector (8) against falling into front fender. | |
5 | Secure window (6) against falling down | with 2nd person | |
6 | Remove carrier plate (1) with power window motor (2) from front door | Installation: Replace self-locking torx bolts (3). | |
| |||
| |||
7 | Remove motor linkage (2) out of guide rail (5) on window | Installation: Grease slide blocks and guide rail with multi-purpose grease. | |
8 | Drill out blind rivets (4) to motor (2) | ||
9 | Remove motor (2) from carrier plate (1). | ||
10 | Install in the reverse order |
Electric system - side doors
Number | Designation | Model | |
BA72.29-N-1001-01A | Screw for motor carrier plate for electric power window on front door | Nm | 10 |
Torx bit set
000 589 01 10 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1009-06A | Multi-purpose paste | A 000 989 80 51 10 |