AR72.16-D-7807B | Removing and installing guide rail for sliding door | 8.9.97 |
MODEL 901.0## /3## /4##, 902.0## /3## /4##, 903.0## /3## /4##, 904.0## /3## /4## ## as of 718451,
901.6, 902.6, 903.6, 904.6
MODEL 690.63 /64
D72.16-0017-06
1 Inner paneling
2 Hexagon nut
3 Torx screw
4 Guide rail
5 Torx screw
| Remove/install | ||
1 | Remove sliding door | ||
2 | Remove inner paneling (1) | ||
3 | Unscrew hexagon nuts (2) | | |
4 | Take out Torx screws (3, 5) | | |
5 | Take off guide rail (4) | Installation: If guide rail is replaced, clean contact surface before installing and pull protective sheet off adhesive strip of guide rail | |
| Guide rail (4) modified | As of VIN #R 140436 on right sliding door and as of VIN #R 147685 on left sliding door: | |
Heat guide rail (4) to approx. 60° C and take off | Installation: Replace guide rail (4). Clean contact surface before installing and pull protective sheet off adhesive strip of guide rail | ||
6 | Install in the reverse order |
Sliding doors
Number | Designation | Models | ||
BA72.16-N-1012-01A | Nut for guide rail on body | Nm | 10 | |
BA72.16-N-1013-01A | Screw, guide rail to body | Nm | 10 | |
Commercially available tools