ar7212s4012p

Remove/install bearing bracket for rear door handle

유형 ar · 주제 72.12 · 버전 0100 · 2017-08-24

적용 대상: Model 470, 471

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 72 도어 › 72.12 리어　도어 — 시리즈 470 · 시리즈 471

EinPAS 29 주행 인증/안전 시스템 › 29.16 잠금/해제 › 29.16.32 잠금/작동 — 시리즈 470 · 시리즈 471

AR72.12-S-4012P

Remove/install bearing bracket for rear door handle

17.05.2017

Model

470, 471

Remove/install bearing bracket for rear door handle

Shown on left rear door (2)

1

Bearing bracket

2

Rear door

3

Seals

4

Cable

S72.12-4521-06

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Move side window of rear door (2) completely to top

2

Remove outer door handle from rear door (2)

AR72.12-S-2410P

3

Remove seals (3)

4

Detach adhesive foil on inner door panel of rear door (2) until access opening (arrow A) is accessible

AR72.12-S-0108P

5

Push bearing bracket (1) backward, remove from door paneling, and remove from rear door (2) via access opening (arrow A)

Installation: Position control cable (4) behind bearing bracket (1) (arrow B).

6

Detach control cable (4) from bearing bracket (1) and remove bearing bracket (1)

7

Install in the reverse order

참조 문서