Removing and installing door liner on rear door

AR72.12-P-1010E

Removing and installing door liner on rear door

23.6.93

 

Removal, installation

1

Open crank window

Rear door open

2

Remove window crank

AR72.10-P-1100GV

3

Unscrew screw on round lock cover (2) and remove round lock cover downward.

4

Press handle recess (3) off with installation wedge



*110589035900

5

Unscrew screw (6) in area of inner door actuation

6

Unscrew Phillips screw (4) on armrest

7

Press door liner (5) off of inner door panel at bottom, front and rear with installation wedge



 Insert installation wedge directly next to each clip.

*110589035900

8

Lift door liner (5) at top on sealing rail up out of clips with installation wedge and simultaneously pull away from inner door panel



*110589035900

9

Open retainer (7) on linkage (8) for door interior actuating mechanism and detach linkage (8)

10

Disconnect electrical connections on door liner

11

Put down door liner

12

Check foil and clips on inner door panel

 Replace damaged foil or clips. Rivet on support for armrest mount after installing foil. When replacing foil cut out this area and glue with overlap joint or seal with adhesive strap.

13

Check clips on door liner

 Replace damaged clips

14

Install in reverse order