S72.10-4662-09
Shown on driver's door in model 470.### 1# |
1 | Door handle | 4 | Screw | 7 | Actuator rod | ||
2 | Plug | 5 | Door handle cover | ||||
3 | Front door | 6 | Lock cylinder |
Shown on front passenger door in model 470.### 1# |
1 | Door handle |
2 | Plug |
3 | Front door |
4 | Screw |
5 | Door handle cover |
S72.10-4661-06
| Remove/install | ||
1 | Remove stop plug (2) from left and right front door (3) | ||
2 | Detach screw (4) until door handle cover (5) is disconnected from bearing bracket | Screw (4) remains in bearing bracket. | |
3.1 | Pull door handle (1) (arrow A) and remove door handle cover (5) with actuator rod (7) installed on lock cylinder (6) from front door (3) until door handle (1) is exposed | When removing door handle (1) from driver's door. | |
3.2 | Pull door handle (1) in the direction of the arrow (arrow A) and remove door handle cover (5) | When removing door handle (1) from front passenger door. | |
4 | Pull door handle (1) in the direction of the arrow (arrow B) toward rear out of bearing bracket and remove in the direction of the arrow (arrow C) from front door (3) | ||
| Check | ||
5 | Perform function test of door handle (1) on front door (3) |