ar7210s0011p

Remove/install sealing frame of front door

유형 ar · 주제 72.10 · 버전 0100 · 2017-08-10

적용 대상: Model 470, 471

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 72 도어 › 72.10 프런트　도어 — 시리즈 470 · 시리즈 471

EinPAS 35 바디/프레임/부착 부품 › 35.35 도어 › 35.35.40 앞좌석 도어 — 시리즈 470 · 시리즈 471

AR72.10-S-0011P

Remove/install sealing frame of front door

26.07.2017

Model

470, 471

Remove/install sealing frame of front door

S72.10-4647-09

1

Frame seal

3

Retaining clip (x 2)

2

Front door

4

Retaining clips (x 32)

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove

1

Unclip sealing frame (1) at retaining clips (3, 4) and remove from front door (2)


Carefully unclip sealing frame (1).
Paint on front door (2) can otherwise be damaged.

Clip remover

*452589016300

Install

2

Check retaining clips (3, 4)


Do not mix up retaining clips (3, 4).
The secure attachment of sealing frame (1) is otherwise not ensured and leaks can arise.

For damage

Replace damaged retaining clips (3, 4).

3

Position sealing frame (1) on front door (2) and clip into retaining clips (3, 4)

Remove/install sealing frame of front door

452 589 01 63 00

Clip remover

참조 문서