Repair materials
Number | Designation | Order number |
BR00.45-Z-1032-06A | Antifriction agent | A 000 989 08 60 |
1 Remove protective foil from outside of window (when installing new window).
2 Lay down window onto packing material with outer side down.
3 Cut off inner sealing lip flush with window.
4 Cut approx. 1 cm wide chamfer (6) on seal starting approx. 5 cm from the rounding on the window. See removed window.
5 Cut off sealing lip (7) starting 5 cm after window rounding, starting from bottom See removed window.
P72.10-3087-03
P72.10-2262-11
6 Lay down window onto packing material with inner side down.
7 Cut window rubber element (3) in lower area approx. 10 cm above window rounding.
8 Insert pull cord (4) into window rubber element (3).
9 Fasten window rubber element (3) to window using strips of adhesive tape (5).
10 Coat window rubber element (3) with antifriction agent.