Removing and installing door liner on front door

AR72.10-P-1000E

Removing and installing door liner on front door

16.3.10

8.9.98

Cover and screw added (with code 292 front side airbag)

Step 4

Work sequence modified

 

Removal, installation

1

Open crank window

2

Remove window crank (8)

AR72.10-P-1100GV

3

Press off door handle recess (2) with installation wedge.



*110589035900

4

Unclip cover (3) and unscrew screw (4)

With code 292 (front side airbag)

5

Unscrew screw on round lock cover (5) and remove round lock cover downwards

6

Press cover (6) off below door pocket and unscrew screw (7).

7

Unscrew screw (10) in area of inside door opener.

8

Press door liner (1) off of inner door panel at bottom, front and rear using installation wedge



 Insert installation wedge directly next to each clip (9).

*110589035900

9

Pry top of the door liner (1) upwards out of the clips at the sealing rail using installation wedge and at the same time pull away from the inner door panel.



*110589035900

10

Open retainer (11) on linkage (12) and unhook linkage (12).

Inside door opener with control cable on electrically adjustable driver's seat
(code 221a).

11

Disconnect electrical connections on door liner

12

Put down door liner (1)

13

Check foil and clips on inner door panel and replace if necessary

 Rivet on mount for armrest locking lug after installing foil. When replacing foil cut out this area and glue with overlap or seal with adhesive tape.

*BR00.45-Z-1004-02A

14

Check clips (9) on door liner (1) and replace if necessary

15

Reinstall in reverse order

Number

Designation

Order number

BR00.45-Z-1004-02A

Adhesive PVC 914

A 001 989 30 71