Remove/install front door lock

AR72.10-D-4011B

Remove/install front door lock

27.9.11

 

Remove/install

 Danger!

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.

Deburr repair panels.

AS00.00-Z-0017-01A

1

Remove door trim on hinged door

AR72.15-D-2150E

2

Remove Keyless entry driver door antenna (A2/103) and Keyless Entry front passenger door antenna (A2/104)

Model 906 with code (FY9) Keyless entry+slide

AR80.61-D-2800A

3

Disconnect connector plug (4) and unclip driver door control unit (N69/1)

4

Disconnect connector plug (5) and remove bass midrange speaker
(H4/25) and (H4/26)

with code (EL8) Two-way speaker, front or

code (EL9) Two-way speaker, front and rear



*BA72.15-N-1016-01C

5

Carefully remove sealing foil (1) from door

 Installation: Replace damaged sealing foil (1).

6

Carefully pry release lever (11) off of lock cylinder (12).

Only on driver side

7

Remove door lock (8) and disconnect connector plug (7) for driver door CL actuator motor (M14/6) and front passenger door CL actuator motor (M14/5)

 Installation: If the arrest (10) of the release lever (11) is opened, clip release lever (11) into ball head of lock cylinder (12) and lock arrest (10).



*BA72.15-N-1012-01C

8

Unhook cable

9

Install in the reverse order

Number

Designation

Model
900

Model
906.1/6/7

Model
906.2

BA72.15-N-1012-01C

Bolt, door lock to hinged door

Nm

10

10

10

BA72.15-N-1016-01C

Screw, speaker to inner door panel

Nm

2

2

2