Remove/install door holder · ar7210d2100d · Mercedes-Benz WIS

AR72.10-D-2100D

Remove/install door holder

27.9.11

MODEL 900, 906

D72.10-1112-06

1 Plug connector

2 Connector plug (with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear)

3 Bolt (with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear)

4 Screw

5 Bolts

6 Door holder

7 Sealing foil

H4/25 Bass midrange speaker (with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear)

H4/26 Bass midrange speaker (with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear)

N69/1 Driver door control unit

 	Remove/install
 Danger!	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
1	Remove door trim		AR72.15-D-2150E
2	Disconnect connector plug (1) and unclip driver door control unit (N69/1)
3	Remove connector plug (2) and remove bass midrange speaker (H4/25) or (H4/26)	with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear
4	Carefully remove sealing foil (7) partially from door	 Remove sealing foil (7) until door holder (6) is accessible.
		 Installation: Replace damaged sealing foil (7).
5	Unscrew door holder (6) from A-pillar	 Installation: Install new self-locking bolt (4)
			*BA72.15-N-1001-01C
6	Unscrew door holder (6) from door	 Installation: Replace self-locking bolts (5).
			*BA72.15-N-1007-01C
7	Install in the reverse order

 Hinged doors

Number	Designation			Model 900	Model 906.1/6/7	Model 906.2


BA72.15-N-1001-01C	Bolt, door holder at A-pillar	M8	Nm	30	30	30
BA72.15-N-1007-01C	Bolt, door holder at hinged door	10.9	Nm	16	16	16