Remove/install trim at C-pillar

AR68.30-P-4490AK

Remove/install trim at C-pillar

19.1.10

 

Remove/install

1

Put down left or right seat cushion of rear bench seat

 See Operator's Manual

2

Unscrew bolt (2) and remove belt end fitting (3)



*BA91.40-P-1001-01K

3

Pivot back left or right rear bench seat backrest

 See Operator's Manual

4

Loosen edge guard (4) in upper area of C-pillar

 Installation: Ensure that edge guard (4) is seated properly.

5

Press C-pillar paneling (1) out of clips (5) with mounting wedge



*110589035900

6

Open liftgate

7.1

Remove retractable trunk partition

For vehicles with code (723) luggage compartment cover

 See Operator's Manual

8

Unclip C-pillar paneling (1) in rear area with assembly wedge



*110589035900

 Installation: Ensure that C-pillar paneling (1) is seated correctly below edge guard (6) on rear door.

9.1

Disconnect electrical connector from left rear surround speaker (H4/54) or right rear surround speaker (H4/57)

On vehicles with code (810) Sound system

10

Guide seat belt (7) through opening in C-pillar paneling (1) and remove C-pillar paneling (1)

11

Check expansion clip (8) at rear of C-pillar paneling (1) for damage, replace if necessary

12.1

Remove left rear surround speaker (H4/54) or right rear surround speaker (H4/57)

When replacing C-pillar paneling (1) on vehicles with code (810) Sound system

AR82.62-P-7855AK

13

Install in the reverse order

Number

Designation

Model
169, 245

BA91.40-P-1001-01K

Bolt/nut on belt end fitting

Nm

32