P68.30-3020-09
1 Roll bar paneling
3 Roll bar
4 Cover
5 Bolts
9 Clip
10 Clip
11 Guides
6 Cover
7 Nut
8 Storage shelf
Modification notes
| Remove/Install | ||
1 | Loosen paneling on right and left upper center pillar | Do not unscrew bolt from belt end fitting and do not disconnect electrical connector | |
2.1 | Remove Parktronic warning display (PTS) in rear | Only on vehicles with code (220) Parktronic system (PTS) | |
3 | Open lid (4) | See Operating Instructions | |
4 | Unscrew bolts (5) and remove cover (6) | On vehicles with code (810) sound system, lay cover (6) down to side with electrical lines connected | |
5 | Unscrew nuts (7), remove stowage compartment (8) and lay down to side | Do not disconnect electrical connectors. | |
Installation: Before tightening nuts (7) close cover (4) and align stowage compartment (8) | |||
6 | Unclip roll bar paneling (1) at rear from clips (9) with mounting wedge | | |
7 | Loosen roll bar paneling (1) at front from clips (10) with door paneling release lever. | | |
8 | Unclip roll bar paneling (1) upward and remove over roll bar (3) | Installation: Replace damaged clips (9, 10). Install guides (11) behind rear paneling (arrows) | |
9 | Install in the reverse order |
Mounting wedge
110 589 03 59 00
Commercially available tools