AR68.10-D-1030B | Remove/install instrument panel center section | 16.2.01 |
MODEL 902.6, 903.6, 904.6, 905.6 with TRANSMISSION 722.681 with CODE (G40) Automatic transmission
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with TRANSMISSION 722.681
D68.10-1126-06
1 Frame trim
2 Stowage compartment
3 Center part of instrument panel (top part)
4 Bolt
5 Connectors
6 Ashtray
7 Bolt
D68.10-1127-06
8 Center part of instrument panel (bottom part)
9 Bolt
| Remove/Install | ||
1 | Pull frame trim (1) of selector lever module up and out | ||
2.1 | Lift stowage compartment (2) up and out | ||
2.2 | Remove timer and disconnect connector. | With code H86, timer with auxiliary heater. | |
3 | Unscrew screw (7) and remove ashtray (6). | ||
4 | Remove screw (4) and take off top part of center section of instrument panel (3) | Mark plugs of connectors (5), unplug. | |
Installation: Connect connectors (5) and install top section (3). To do this, first of all attach the retaining hooks at the rear (arrows) and then press down the front. | |||
5 | Remove screws (9) and take off bottom part of instrument panel center section (8) | Loosen catch lugs of component at illustrated points (arrows) with plastic wedge. | |
6 | Install in the reverse order | ||
7.1 | Set time on timer for auxiliary heater | With code H86, timer with auxiliary heater. |