D65.10-1325-09
1 Separate weld seams on center roof paneling (1) (areas B and D).
2 Expose spot welds on center roof paneling (1) (areas A and C) and cut out.
Cut out spot welds through two panel thicknesses (area C).
D65.10-1326-09
3 Slightly bend roof paneling center section upward in front area (arrows).
4 Heat center roof paneling (1) in crosshatched areas with heat gun.
5 Remove damaged center roof paneling (1)
D65.10-1328-09
6 Remove sealant on cross struts below roof paneling.
7 Grind mating surfaces down to bare metal in the crosshatched areas.
Grind spot weld flanges down to bare metal on both sides.
8 Remove shavings and drill chips.
9 Coat insides of spot weld flanges with zinc dust paint.