201 589 00 51 00
Spot weld miller
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
D64.30-0002-06
Figure shows van with high roof as an example
1 Cut spot welds out of right outer corner pillar paneling (1).
D64.30-0003-06
Figure shows van with high roof as an example
2 Cut spot welds out of right outer corner pillar paneling (1) and side wall inner section (2) (arrows).
D64.30-0004-06
Figure shows van with high roof as an example
3 Cut spot welds out of right outer corner pillar paneling (1) (arrows).
D64.30-0005-06
Figure shows van with high roof as an example
4 Cut spot welds out of right outer corner pillar paneling (1) (arrows).
D64.30-0006-06
Figure shows van with high roof as an example
5 Mark separation line (dotted line, 3) along drip molding (6) at a distance of approx. of 100 mm.
6 Separate right outer corner pillar paneling (1) along marked separation line (dotted line, 3).
7 Separate right outer corner pillar paneling (1) along end plate (5) (dotted line, 14).
Figure shows van with high roof as an example.
8 Separate right outer corner pillar paneling (1) along side wall paneling (4)
(dotted line, 7).
9 Remove right outer corner pillar paneling (1).
D64.30-0007-03