Prepare rear wall for installation

AR64.10-S-5746-02P

Prepare rear wall for installation

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Model

470, 471

1

Punch holes for MAG welding in rear panel (1) (area A).

 Commercially available devices/tools
Hole punching pliers

2

Drill holes for MAG welding in rear panel (1) (areas B and C).

 Commercially available devices/tools
Hand drill

3

Drill holes for MAG welding in rear panel (1) through 2 panel thicknesses (areas D and E).

 Commercially available devices/tools
Hand drill

4

Grind mating surfaces on rear panel (1) down to bare metal in cross-hatched areas and around the holes (areas A, B, C, D and E).

 Commercially available devices/tools
Rotary wire brush

5

Remove shavings, drilling chips and punching residues.

 Commercially available devices/tools
Wet and dry vacuum cleaner