P63.50-3836-08
1 | Separate self-piercing rivets from rear fender (1) (areas A and B). |
Drill self-piercing riveting with Ø 4 mm bit. |
2 | Separate weld seams on rear fender (1) (areas C and D). |
P63.50-3837-08
3 | Heat rear fender (1) in crosshatched areas. |
Cross-hatched areas are bonded. |
4 | Remove mount for taillamp (3) and connecting panel (2) and dispose of. |
P63.50-3838-09
5 | Grind mating surfaces on rear fender (1) down to bare metal in crosshatched areas on inside. |
Observe pretreatment of bonding surfaces. |
6 | Grind mating surfaces on rear fender (1) down to bare metal on both sides (areas A). |