Workshop equipment
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
D63.50-0005-06
1 Punch 6 mm dia. holes in areas (5 and 6) at a maximum hole interval of 15 mm (arrows).
2 Uniformly punch
3 holes with 6 mm dia. bit in area (7) (arrows).
3 Grind outer wheel flange (1) down to bare metal in marked area (4) and coat with zinc dust paint.
4 Grind outer wheel flange (1) down to bare metal on both sides in marked areas (5, 6, 7 and 8) and coat with zinc dust paint.
D63.50-0006-05
5 Punch 2 holes with 6 mm dia. bit on left and right at a maximum hole interval of 15 mm in area (9) (arrows).
6 Grind outer wheel flange (1) down to bare metal on both sides in marked areas (9 and 10) and coat with zinc dust paint.