Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
D63.30-0003-06
1 Mark holes at rear outer sliding door entry with the following dimensions:
a = 10 mm
b = 20 mm
c = 17 mm
d = 27 mm
e = 95 mm
f = 17 mm
g = 35 mm
h = 7 mm
i = 27 mm
D63.30-0004-06
2 Mark holes at front outer sliding door entry (1) with the following dimensions:
a = 12 mm
b = 30 mm
c = 52 mm
d = 9 mm
e = 15 mm
f = 15 mm
g = 40 mm
h = 60 mm
3 Drill all marked holes with 6 mm dia. bit.
4 Grind outer sliding door entry (1) down to bare metal on both sides in area of drilled holes and coat with zinc dust paint.
D63.30-0005-10
5 Grind outer sliding door entry (1) down to bare metal on both sides in marked area (4) and coat with zinc dust paint.
6 Fit outer sliding door entry (1), align and clamp.